Test results
Filter test results and certification
What the Puure Nano filter reduces, measured by independent ISO/IEC 17025 accredited labs in Germany and Croatia, commissioned through the testing company Measurlabs. Every report can be downloaded.
Measurlabs reports 25146 (28 September 2026) and 30494 (31 August 2026) · Updated 23 October 2026
99.9%
lead and mercury
20
PFAS tested: sum reduced by at least 99%
99.9%
of fluoride reduced: not detected after filtration (dedicated test)
Lab-tested Puure Nano filter, ISO/IEC 17025 accredited lab (Measurlabs report 25146, 28 September 2026). Fluoride: dedicated test, report 30494, 31 August 2026.
Results by substance
Measured on the Puure Nano filter (report 25146) and, for fluoride, on a Puure filter (dedicated test). Results can differ with your water.
Swipe sideways to see the whole table
| Substance | Result after filtration |
|---|---|
| PFAS“Forever chemicals” | 20 PFAS tested: the sum was reduced by at least 99% (1 µg/L → below 0.010 µg/L) |
| LeadHeavy metal, old pipes | 99.9% |
| MercuryHeavy metal | 99.9% |
| ArsenicHeavy metal | 98% |
| Copper, zinc, cadmium, chromium, uraniumOther metals | 99% |
| MicroplasticsPlastic particles | 112 particles before filtration, no microplastic particles detected after |
| Pesticides157 tested | 156 below the quantification limit after filtration (including atrazine, simazine, diuron, imidacloprid, metolachlor and glyphosate); glufosinate: 0.11 µg/L |
| Pharmaceuticals24 tested | Most below the detection limit after filtration. Metformin reduced by about 96%, sulfamethoxazole by about 99% |
| Bisphenols5 tested | All below 0.047 µg/L after filtration |
| PAHsCombustion by-products | 98%+, all below the detection limit after filtration |
| Free chlorineTaste and smell | 0.24 mg/L in, below 0.05 mg/L out (below detectable levels) |
| FluorideDedicated lab test, July 2026 | 99.9% reduced: 1 mg/L before, not detected after (dedicated test, report 30494) |
| Calcium and magnesiumUseful minerals | Pass through: no demineralisation, no reverse osmosis |
Lab-tested Puure Nano filter, ISO/IEC 17025 accredited lab (Measurlabs report 25146, 28 September 2026). Fluoride: dedicated test, report 30494, 31 August 2026. Accredited methods: PFAS, PAHs, pesticides and metals. Microplastics, pharmaceuticals, bisphenols, free chlorine and fluoride were measured by the same lab with non-accredited methods.
Who tested the filter, and why it is independent
We did not test our own filter. We ordered the tests from Measurlabs, a testing company based in Helsinki, Finland. Measurlabs does not make or sell water filters and has no link with Puure. It sends each analysis to the specialised lab that is accredited for it, then issues the report.
The analyses themselves were done by two accredited labs (confirmed in writing by Measurlabs, 7 August 2026):
- Germany: PFAS, pesticides, pharmaceuticals and other chemicals. Lab accredited by DAkkS (German Accreditation Body) to DIN EN ISO/IEC 17025, specialised in drinking water analysis under the German Drinking Water Ordinance.
- Croatia: microplastics, free chlorine and fluoride. Lab accredited by HAA (Croatian Accreditation Agency) to HRN EN ISO/IEC 17025.
Why go through Measurlabs?
We had more than 200 substances to test: PFAS, metals, pesticides, pharmaceuticals, microplastics, chlorine and fluoride. No single lab is specialised in all of them. Measurlabs gave us access to specialised labs across Europe, so each family of substances was measured by a lab that does this analysis every day. That is how we got high-quality results for every substance.
Is Measurlabs a laboratory?
Measurlabs is a testing service: it manages the project and works with a network of accredited partner labs. The measurements are made by those labs, which are independent from Puure and accredited by national bodies (DAkkS in Germany, HAA in Croatia). Measurlabs keeps the names of its partner labs confidential, as it does for all its clients.
Can Puure change the results?
No. Puure paid for the tests, like any client of a lab, but the measurements, methods and figures come from the labs. Only Measurlabs can issue or revise a report. Each report states which methods are accredited and which are not.
What is certified
The Puure® replacement filter is Tested and Certified by NSF International against NSF/ANSI Standard 42 for material requirements only.
Certificate C0896669 · Download (PDF)
What has not been tested
Bacteria and viruses: not tested, so we make no claim.
Which filter
The results on this page were measured on the Nano filter for the Tap System, except fluoride (dedicated test, report 30494). They do not apply to the shower filter.
Every document
NSF certificate
NSF International · NSF/ANSI Standard 42 · PDF
Lab report 25146
Measurlabs, ISO/IEC 17025 · Nano filter · 28 September 2026 · PDF
Lab report 30494
Measurlabs · Fluoride, tested July 2026 · 31 August 2026 · PDF
Lead-free compliance
Puure® 3.0 Tap System · PDF
REACH compliance
Puure® 3.0 Tap System · PDF
How the lab tests the filter
The lab adds a known amount of each substance to pure water, runs it through a new Puure Nano filter at up to 2.4 bar, then measures what comes out. We publish the full reports.